THE HISTORICAL OUTFITTER
USD
A GOOD FIT STARTS HERE

Made for history.
Measured for you.

US sizing for shoes, caps and uniforms. Start with your measurements, then find the label for your next piece.

Measure first. Choose with confidence.

These are general reference charts. Historical cuts and makers vary; the individual product’s fit information takes priority.

Ask about your fit
01 / FROM THE GROUND UP

Shoes & boots

Measure your foot, not the sole or insole of a shoe. Check whether the listing uses US men’s or US women’s sizing.

US men’s shoe sizes

General US men’s footwear reference — half sizes included
US sizeFoot length (cm)Foot length (in)
522.99.00
5.523.39.19
623.79.31
6.524.19.50
724.69.69
7.524.99.81
825.410.00
8.525.910.19
926.210.31
9.526.710.50
1027.110.69
10.527.510.81
1127.911.00
11.528.411.19
1228.711.31
12.529.211.50
1329.711.69
13.530.011.81
1430.512.00
14.531.012.19
1531.312.31

US women’s shoe sizes

General US women’s footwear reference — half sizes included
US sizeFoot length (cm)Foot length (in)
522.18.69
5.522.48.81
622.99.00
6.523.39.19
723.79.31
7.524.19.50
824.69.69
8.524.99.81
925.410.00
9.525.910.19
1026.210.31
10.526.710.50
1127.110.69
11.527.510.81
1227.911.00
12.528.411.19
1328.711.31
13.529.211.50
1429.711.69
14.530.011.81
1530.512.00

Approximate reference lengths, rounded to two decimal places in inches and one in centimetres. Width and instep also affect fit. Don’t add an allowance to your measurement unless the product’s guide asks you to.

Width, tall boots & between sizes

Measure across the widest part of both feet and note your instep. For tall boots, also send your calf circumference and the height from the floor to the top of the boot. If your measurement falls between rows, contact us with both measurements and the product link before ordering.

A US men’s size and a US women’s size with the same number are different. EU and UK conversions vary by maker; send your measured foot length rather than relying on a conversion alone.

02 / THE FINISHING TOUCH

Caps & hats

US fitted-hat sizes use fractions. A label such as US 8 refers to a hat size, not an 8-inch head measurement.

General US fitted-hat reference
US hat sizeLetter sizeHead (cm)Head (in)
US 6 3/8—5120.08
US 6 1/2—5220.47
US 6 5/8XXS5320.87
US 6 3/4XS5421.26
US 6 7/8XS5521.65
US 7S5622.05
US 7 1/8S5722.44
US 7 1/4M5822.83
US 7 3/8M5923.23
US 7 1/2L6023.62
US 7 5/8L6124.02
US 7 3/4XL6224.41
US 7 7/8XL6324.80
US 82XL6425.20
US 8 1/82XL6525.59
FOR EXAMPLE

US 8 ≈ 2XL · 64 cm / 25.20 in in this reference chart.

View the US Army Air Corps crusher cap

US/metric labels follow a common fitted-hat convention. Inch values are converted from the metric column; manufacturer rounding and finished-cap fit can differ. Letter sizes are approximate military-style groupings and vary by maker. A dash means no letter equivalent is specified; use the head measurement and US hat size first.

03 / THE COMPLETE IMPRESSION

Uniforms & clothing

For US inch-labelled garments, the number commonly describes a body measurement. A 40 chest is approximately 101.6 cm around the body; it is not the coat’s finished chest width.

Coats, jackets & waistcoats

Use this chart when the product’s option is a US chest size. Measure over the shirt or light layer you intend to wear; do not add extra inches for movement unless the listing tells you to.

US inch-labelled chest sizes
US labelBody chest (in)Body chest (cm)
303076.2
323281.3
343486.4
363691.4
383896.5
4040101.6
4242106.7
4444111.8
4646116.8
4848121.9
5050127.0
5252132.1
5454137.2
5656142.2
5858147.3
6060152.4
Trousers & breeches

Use the waist at the height the historical trousers are worn. Many period styles sit higher than modern jeans. Record your inseam separately; a waist label does not specify leg length.

US inch-labelled waist sizes
US labelBody waist (in)Body waist (cm)
262666.0
282871.1
303076.2
323281.3
343486.4
363691.4
383896.5
4040101.6
4242106.7
4444111.8
4646116.8
4848121.9
5050127.0
5252132.1
5454137.2
5656142.2
5858147.3
6060152.4
Shirts: neck & sleeve

Use this chart for a collar size in inches. Measure around the base of the neck with room for comfort. For sleeve length, measure from the centre back of the neck, across the shoulder and down a slightly bent arm to the wrist.

US inch-labelled collar sizes
US labelNeck (in)Neck (cm)
141435.6
14.514.536.8
151538.1
15.515.539.4
161640.6
16.516.541.9
171743.2
17.517.544.5
181845.7
18.518.547.0
191948.3
19.519.549.5
202050.8
20.520.552.1

Sleeve labels such as 34/35 describe sleeve length in inches, not chest size. Follow the individual shirt’s measurement instructions.

Letter sizes: XS–5XL

A common US military BDU convention is shown below as a reference. Letter sizes vary by maker and era; these are body ranges, not iSutler garment dimensions.

General US military letter-size reference
SizeChest (in)Chest (cm)Waist (in)Waist (cm)
XS29–3373.7–83.823–2758.4–68.6
S33–3783.8–94.027–3168.6–78.7
M37–4194.0–104.131–3578.7–88.9
L41–45104.1–114.335–3988.9–99.1
XL45–49114.3–124.539–4399.1–109.2
2XL49–53124.5–134.643–47109.2–119.4
3XL53–57134.6–144.847–51119.4–129.5
4XL57–61144.8–154.951–55129.5–139.7
5XL61–65154.9–165.155–59139.7–149.9

Short, regular and long lengths are pattern-specific. Check sleeve, back length, rise and inseam separately. For women’s clothing or a tailored fit, send bust/chest, waist and hip measurements so we can confirm the exact style.

BETWEEN SIZES?

A little advice.
A better fit.

Send the product link, your measurements and the socks or layers you plan to wear. We’ll help you check the right option before you order.

Get sizing advice
About these reference charts

These charts explain common US size conventions. They do not certify the measurements of every reproduction. Product-specific measurements and advice take priority; sizes shown here do not imply every item is offered in every size.

Conversions use 1 inch = 2.54 cm. Numeric chest, waist and collar tables convert the label’s inch measurement directly; they are not finished-garment measurements.

Search the collection

Your collection

Your collection is loading.